Acer Power Control - Omarchy

🎬 Video Demo

GPU power and turbo mode setup for Acer Nitro/Predator laptops running Omarchy.

Unlocks the full GPU power range (up to 60W) by enabling the acer_wmi predator mode kernel module option, setting the platform profile to performance, and enabling NVIDIA Dynamic Boost via nvidia-powerd.

Requirements

• OS: Omarchy (Arch Linux)
• Hardware: Acer Nitro or Predator laptop with NVIDIA dGPU
• Kernel: Must have CONFIG_ACER_WMI enabled (default on Arch)

Quick Start

git clone https://github.com/28allday/Acer-Power-Control-Omarchy.git
cd Acer-Power-Control-Omarchy
chmod +x setup-acer-turbo.sh
./setup-acer-turbo.sh

The script will re-run with sudo automatically if not run as root.

First run requires a reboot - the predator_v4 module option only takes effect after reboot. Run the script again after rebooting to complete setup.

What It Does

The script performs four steps:

1. Configure acer_wmi Module

Writes /etc/modprobe.d/acer-wmi.conf with predator_v4=1 to enable turbo power mode support in the Acer WMI kernel module.

2. Activate Predator Mode

Checks /sys/module/acer_wmi/parameters/predator_v4 to verify the module option is active. If not, prompts for a reboot.

3. Set Platform Profile to Performance

Writes performance to /sys/firmware/acpi/platform_profile, unlocking higher GPU power states controlled by the laptop's Embedded Controller (EC).

4. Enable nvidia-powerd

Enables and starts nvidia-powerd.service for NVIDIA Dynamic Boost, which allows the GPU to dynamically allocate power between the CPU and GPU based on workload.

Usage After Setup

After each reboot, press the Turbo Key (NitroSense button) on your keyboard to cycle through GPU power levels:

35W -> 40W -> 50W -> 60W (max)

Press it 3-4 times until you reach the desired power level.

Quick Check

nvidia-smi -q -d POWER | grep 'Current Power Limit'

Files Modified

Path	Purpose
/etc/modprobe.d/acer-wmi.conf	Enables predator_v4=1 module option
/sys/firmware/acpi/platform_profile	Set to performance (runtime, not persistent)

Uninstalling

# Remove module config
sudo rm -f /etc/modprobe.d/acer-wmi.conf

# Disable nvidia-powerd if desired
sudo systemctl disable nvidia-powerd

# Reboot to restore defaults

Credits

• Omarchy - The Arch Linux distribution this was built for
• Acer WMI kernel module - Provides predator/turbo mode support

License

This project is provided as-is for the Omarchy community.