Commit graph

7 commits

Author SHA1 Message Date
ff67bd6a71 Probe known and Tailscale peers in headless send
runHeadlessSend only ran multicast discovery, so `--to <alias> --message`
could not reach a peer that is only routable over the tailnet (or another
subnet), even though the TUI and quick-send paths could via watchRemotes.
Start the same watcher in the headless path: known peers from config plus
online Tailscale peers are unicast-probed, the probe handshake records the
peer, and FindPeer picks it up like any multicast discovery.

Verified live against a tailnet-only peer (different subnet, DERP-relayed):
discovered and message delivered. TestFindPeerViaProbe covers the
composition Probe -> NotePeer -> PeerFound -> FindPeer.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
2026-06-06 12:18:04 +01:00
2c058031fd Add remote-peer support over Tailscale and unicast probing
Multicast only finds peers on the same LAN. Reach off-LAN boxes by probing
them directly over unicast (works over any routable address; Tailscale is the
easy, secure choice):

- discovery.Probe: unicast POST /register (https->http fallback) with a two-way
  handshake, so send and receive both work; offline peers age out.
- internal/tailscale: Peers() shells `tailscale status --json` for online peers.
- config.KnownPeers: persisted manual remotes.
- main.go: watchRemotes goroutine probes knownPeers ∪ tailscale peers every 10s,
  in both the normal TUI path and quick-send.
- TUI: `+` on Devices opens an add-remote modal (host/IP/Tailscale name).
- install.sh: interactive local/remote install prompt; remote mode locks port
  53317 to the Tailscale interface (ufw), with container/userspace-networking
  detection. README documents remote devices.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
2026-06-02 21:47:52 +01:00
cfa719e2b4 Add fuzzy send finder, quick-send, and Nautilus right-click
Send picker: replace the directory browser with a recursive fuzzy finder.
Type to match files/folders anywhere under $HOME (sahilm/fuzzy, now a direct
dep, compiled in), stage with enter, ctrl+d folders-only, ctrl+s send,
ctrl+u re-root up. Folder send is preserved (staging a dir sends it whole).

Quick-send: `omarchy-send <paths>` opens the TUI on the device list with the
paths pre-staged; selecting a device sends immediately and the window closes
itself when the transfer completes. Runs server-less so it coexists with an
already-running instance (controller Set* methods nil-guard the server).

Nautilus right-click "Send via Omarchy-Send" (desktop-only): a nautilus-python
extension that launches quick-send in a floating terminal with the selection
pre-staged. Resolves omarchy-send to an absolute path since ~/.local/bin is
not on Nautilus's session PATH. install.sh ships it only where Nautilus is
present, so headless boxes skip it.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
2026-06-01 14:46:05 +01:00
e66662feb9 Headless one-shot message send + desktop notifications on incoming
Two related additions for using omarchy-send beyond the focused TUI:

Headless send (no TUI / no TTY) — for scripts, cron, SSH sessions:
  omarchy-send --to "<alias>" --message "<text>" [--send-pin N] [--wait 15s]
Resolves the peer by alias over multicast (discovery only, not the HTTP
receiver, so it co-exists with a running instance), sends, prints a
one-line result, and exits non-zero on not-found / failure. New
discovery.FindPeer/Snapshot and client.SendMessageSync (returns the error
directly, incl. ErrPinRequired).

Bugfix surfaced by the above: the official LocalSend client answers a
message prepare-upload with HTTP 204 No Content (the text rides in the
preview field, nothing to upload). prepareUpload only accepted 200, so
message sends to official peers failed with "prepare-upload status 204"
in BOTH the new headless path and the existing TUI. Now treats 204 as
success (empty response).

Desktop notifications: a running receiver raises a notify-send
notification on an incoming message or file offer, so mako shows it on
Omarchy/Hyprland even when the TUI isn't focused. New internal/notify
(best-effort; self-disabling on headless boxes with no notify-send /
session bus). Off-switch: --no-notify flag, cfg.NoNotify, and a Settings
'n' toggle wired to a live atomic gate via Controller.SetNotify so it
takes effect without a restart.

Tests: discovery/find_test, client/message_sync_test,
client/prepare_204_test, app/events_test. Race-clean.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
2026-05-29 14:13:43 +01:00
098c34c546 Clipboard send/copy, PIN for messages, and quiet stdlib logging
- Messages to a PIN-protected peer now prompt for the PIN and retry, like
  file sends (was a silent failure). SendMessage takes a pin argument and the
  TUI tracks whether a pending send is a message or files.
- Copy a received message to the clipboard with `y` (in the Messages tab or
  while reading one).
- Send the clipboard as a message with `v` on a device: it opens the compose
  box pre-filled with the clipboard text to review before sending.
- New internal/clipboard package shells out to wl-clipboard / xclip / xsel,
  and falls back to tmux's paste buffer when running inside tmux on a headless
  box (tmux load-buffer -w also reaches the outer clipboard via set-clipboard,
  which omaterm enables by default). No system tool -> "clipboard unavailable".
- Route the standard logger to the debug log (or discard) at startup so stray
  stdlib logging — e.g. net/http's "unsolicited response on idle channel"
  notice after a peer sends a late response — can't paint over the TUI.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-27 22:06:24 +01:00
7ab3f905ee Send and read plain-text messages
Adds LocalSend-compatible text messaging alongside file transfer.

Wire format (matches the LocalSend app): a message is a single "file" with
fileType "text/plain" whose content rides in the prepare-upload `preview`
field. The receiver returns an empty token set, so nothing is uploaded — the
text is read straight from the preview.

- client: SendMessage builds that single-file prepare-upload (no body upload).
- server: detect a message (one text file with non-empty preview), surface it
  on a new Messages() channel instead of saving a file, and respond with an
  empty file set. Messages bypass the accept prompt (auto-received); the PIN
  gate still applies.
- app: bridge the server's messages channel to the TUI as MessageMsg.
- tui: a new Messages tab lists received messages (enter to read full, d to
  delete); press `m` on a device to compose and send one. Incoming messages
  show a footer notice.

Tests: end-to-end send→receive (text intact, sender preserved, nothing written
to disk) and unit coverage of the message-detection rule.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-27 21:40:40 +01:00
2dd81700c0 Initial commit: Omarchy-Send v0.1.0
LocalSend-compatible file-transfer TUI for headless Arch/Omarchy servers.

- Pure-stdlib implementation of the LocalSend v2 protocol (discovery,
  HTTPS with matching cert fingerprint, send/receive, PIN).
- Bubble Tea TUI: Devices, Transfers, Manage (received-file housekeeping)
  and Settings, theme-aware on Omarchy.
- Dual-mode install.sh: curl-pipe download or build-from-clone.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-27 19:26:08 +01:00